Eight Accessories That Will Make Your Tools Even More Useful

We may earn a commission from links on this page.

If you own a home or just like to maintain your stuff, you probably own a bunch of tools that help you do stuff that would be impossible otherwise. (Unless you've had more success than I have at hammering a nail into a block of wood with your fists). But tools themselves can often be augmented with accessories that make them a little easier to use, more effective, and safer—think of these accessories as tools for your tools.

Even the best-stocked tool chest can be improved with the addition of a few simple, low-cost accessories. Here are eight that every DIYer should pick up to make their next project a little easier.

Bucket organizers

My DIY process used to involve several trips back and forth between the project site and my tool closet, because I can only carry so much stuff at one time. Stuffing tools and loose screws into your pockets might get the job done, but it isn’t pretty, especially when the clawtooth hammer gets stuck in your pocket and you rip your pants open while standing on your roof in full view of the neighborhood, which is definitely not something that has ever happened to me. That’s why a bucket organizer (like the Bucketeer) is a must-have. It’s so simple it’s ridiculous: These organizers slide into the bucket and act as a tool belt around the exterior. You can still use the bucket as a bucket, while also easily transporting your gear.

Depth stop collars

One lesson I’ve learned in my DIY journey is that I’m never as in control of my power tools as I think I am. The evidence for this is all the times I’ve drilled way too deep for what I need. Whether you need a series of holes drilled to a precise depth, or you want to avoid overdrilling through the back of something, you quickly learn that eyeballing stuff and drilling by “feel” is an easy way to screw everything up. Having a set of depth collars like these is the answer. They clamp onto your bit and prevent you from over- or under-drilling. Aside from the precision, they also allow you to put full force behind the drill, because you don’t have to worry about losing control at the critical moment and over-drilling.

Anti-vibration pads

DIY projects can be pretty noisy. An anti-vibration pad like this one is an essential tool accessory. It reduces the noise from vibration and helps to protect the surface under your tools or materials so you can work safely. You can buy these in pre-sized versions, but buying a roll allows you to cut it up to fit your needs, so you can create pads for use under appliances (like the washing machine) to reduce noise and vibration, to use under portable saws and other tools, and to slide under materials that you’re working on. It’s a simple fix that makes DIY projects a lot more pleasant.

Dust collectors

Dust is a byproduct of just about every project you’ll ever do around the house. You can try hanging plastic sheets or using tape and/or envelopes to catch dust, but in my experience, neither really works—dust still gets everywhere. That's why this dust collector from DeWalt is a genius tool accessory: It suctions to the wall and connects to your wet/dry shopvac, effortlessly capturing all that dust from drilling and sanding.

Anti-vibration gloves or wraps

If you’ve ever used a power tool for a long stretch of time, you know how tired your hands and arms can get. You can reduce that stress on your body by reducing the vibrations you absorb from your tools with either anti-vibration gloves or an anti-vibration wrap that you can apply to hand tools (like hammers). These accessories absorb those vibrations, not only making them more comfortable to use but also increasing your control, because the tool won’t vibrate right out of your hands.

Magnetic wristbands

If you’ve ever wasted an hour of your life trying to find a dropped screw because you had no spares (I can neither confirm nor deny I’ve done this), you need a simple magnetic wristband like this one. It gives you a hands-free way to hang onto screws, bolts, nails, drill bits, or anything else metallic that you’re working with.

Flexible drill bits

Inevitably you’ll find yourself pondering how you can drill or screw something around a corner, or in a very tight space where no power tool could possibly fit. The answer is this amazing tool accessory: A flexible bit holder. With one of these, you can drill around corners or inside tight spots where a traditional bit can’t go, thus removing one more obstacle to getting your project finished.

Laser saw guide

If you use a miter saw or any kind of circular saw, you know that even when you carefully measure and mark your materials, you can still mess up the cut. Undercut by the slightest margin and you’ll waste time sanding ends down or trying to make impossibly small extra cuts. Overcut, and you just wasted your time, effort, and materials.

Adding a laser guide to your blade eliminates this risk. It clearly and accurately shows you exactly where your blade is going to bite, so you’ll know immediately if you’re a fraction of a millimeter off. You’ll be able to adjust before you cut, preventing frustration and waste.

View the full article