Seven Clever Ways to Use C-Clamps Around the House

We may earn a commission from links on this page.

If you’ve been doing any kind of work around any kind of house for a while, you probably have a few trusty old-school C-Clamps on hand. The C-Clamp has been in use for thousands of years. It’s one of those dead-simple tools that just works. It’s also one of those tools you tend to collect multiple examples of, in different sizes.

Typically, you use a C-Clamp to, uh, clamp stuff together, like two pieces of wood, or to clamp something into place while you work on it (I use them a lot to cut lumber so I can have both hands on the saw, as I am allergic to emergency rooms.) But the C-Clamp is actually a very versatile tool that can be deployed in a number of creative—but useful!—ways. Here are some of my favorite ways to repurpose those old C-Clamps.

A carrying handle

If you need to carry something that’s bulky, heavy, and awkward, having some temporary handles always makes the job easier. If you have a few C-Clamps, you’re golden: Just clamp a couple onto whatever you’re transporting and you have instant handles to make the haul a little easier. They can also be used as handles for rolled-up materials, like rugs or mats—just thread the roll through a pair of C-Clamps, tighten them closed, and carry on.

A quiet hammer

It’s happened to all of us: You need to drive a nail somewhere, but there’s no room to swing a hammer, or for some reason you’re reluctant to make a lot of banging noise. The solution is your trusty C-Clamp: Just place the clamp over the nail head and tighten. The clamping action will inexorably (and silently) drive that nail into place. This isn’t an efficient way to drive a lot of nails, of course, but in a tight spot, it’s brilliant.

An emergency wrench

Need to tighten or loosen a connector, but you don’t have a wrench at hand? Tighten a C-Lamp around the bolt, cuff, or connection point so that it’s gripping tightly, then slowly turn it in the direction you need. Make sure the clamp is tight enough to prevent slippage, and you might want to use something (a handy piece of cloth works) to protect the connection from damage as you work.

A cord organizer

Whether it’s corralling all those extension and power cords on a workbench or work site, or organizing computer cables on your desk with an industrial vibe, C-Clamps can keep all those wires under control and out of your way in a pinch. Just gather the cords at the edge of the desk or table and clamp them down. This is a perfect temporary solution, as the cords can pass freely through the clamps without risk of damage, and the clamps can be removed when the job is done.

Bookends

Need a couple of bookends to hold stuff in place on a shelf? A pair of C-Clamps attached to the outer edge and clamped in as deep as possible will work. This could even be a permanent design choice if your taste runs toward the rustic or industrial.

Anchors

C-Clamps are ideal devices when anchor points are needed, but you don’t want to attach anything permanent that would require fasteners and drilling into a structure. Need a clothesline to dry your laundry when the dryer breaks? Two C-Clamps and some rope or twine are all you need. Need to hang tools, clothes, or anything else? C-Clamps attached to a shelf of any kind, combined with a hook, will work a charm. Need to hold a tablecloth or other covering in place? Nothing clamps stuff down to a horizontal surface better than C-Clamps.

Spool holder

Whether you’re spooling filament to your 3D-printer or feeding twine or wire to yourself as you work on a project, sliding the spool over a C-Clamp and then clamping it into place gives you a sturdy holder that you can pull from. This means you won’t have to juggle your spool every time you need more slack, and you can easily unclamp and reposition the spool if you’re on the move as you work.

View the full article